Length: L=2690mm~2860mm
- Used for the floor 2.9-3.0m, to achieve "one bar to the top", generally used in early demolition or not early demolition
- To achieve no free end (jacking) construction
- The middle position of the vertical pole adjustment, suitable for human height, no need to climb
- Simple installation and removal, easy handling, stable support, high safety
Performance comparison with traditional coil scaffold
Labor Saving: The weight of early release buckle is 1.2 kg, the traditional early release device is more than 7 kg, and the configuration of three layers is 21 kg. Early disassembly buckle weight 1.2kg, comprehensive reduction of labor intensity 20 times. Including installation, disassembly, secondary handling, loading and unloading vehicles.
Time Saving:The traditional early removal head is equipped with three layers, and the labor of two nuts is adjusted when the early removal head is installed and disassembled, the process is complicated, and the labor time is time-consuming such as secondary handling and loading and unloading trucks.Early release buckle light weight, with the vertical rod handling, comprehensive saving time of more than 90%.
Cost Saving:The traditional early dismantling device is configured with three layers, and the comprehensive costs such as purchase input, secondary handling, loading and unloading truck labor, maintenance costs, and storage are very high.The weight of our buckle is configured one layer early, saving 80% of the comprehensive cost.
Safety: The traditional early removal head is inserted on the vertical rod, the nut is adjusted, the primary and secondary keel laying template is placed, the whole is swaying, and the unsafe affects the construction, and the template can be stable after being completely nailed to the wall along the mouth.
The early removal vertical rod is an integrated structure, and the early removal bracket is fixed on the vertical rod without free end, which solves the problem of swaying, and the construction is safe and reliable.
When the traditional early removal head is installed, the carrier is not in place due to the adjustment of the silk mother Phenomenon, resulting in the phenomenon of virtual branches.
Our early removal vertical rod and early removal buckle are adopted to avoid the phenomenon of false branch and back top.
In the process of traditional early removal, the workers on site are easy to knock the wrong nut, which causes the early removal device to produce torsion and easy to crack the concrete roof.
Using our early removal vertical rod and early removal buckle, pull out the bumper, loosen the buckle screw, and do not move the screw nut to ensure that the vertical rod will not scratch.
